Dry transfers and vinyl
... for DIYers and general info.

Although quite durable, dry transfers can be scratched and marked if handled roughly, we recommend that transfers are protected with a lacquer or varnish, to make them resistant to damage.

If applying yourself, we strongly advise you test your finish out before final application, as some lacquers and varnishes could cause bad reactions, and could be prone to cracking, fading and blurring of the decals.

A quality finish can be achieved with practice and patience.

Dry Transfers ...
... What can be achieved and how.

  • Any colour or colour matching system can be matched:
    ... e.g. Pantone, BS, RAL, ICI, metallics and white
  • Any shape can be produced:
    ... e.g. Pinstripes to a 0.5 mm thickness
  • Transfers will come as one colour per sheet with a TIP Sheet included:
    ~ e.g. Apply by locating decal, and rubbing down with burnisher (web video to follow soon).
    ~ The transfer base is slightly sticky on the underside i.e.The side that makes contact with the model
    ~ Prepare surface to be decorated ensuring surface is dry, and dust free
    ~ The transfer sheet can be cut into any number of pieces for ease of application
    ~ With multi-colour images, take care to follow registration marks.
Please Call Us if you have any questions
...we will be happy to walk you through the process!

Vinyl Labels ...
... what can be achieved and how.

  • Full colour high-resolution vinyl labels cut to any shape on a wide range of materials and sizes from a postage stamp to a banner
  • Use point of a craft knife to carefully lift self-adhesive label from backing sheet and apply to prepared clean surface
  • Once label is in correct position, push firmly into place
  • This material is designed to follow any curve or detail, so press firmly until it forms to required shape
  • Use a hair dryer to warm and press firmly into shape, heat will soften label for improved application over detail
  • It is possible to apply wet with a little soapy water
  • Ensure all moisture is squeezed out from under the label
  • Wet application will have varying levels of success depending on many factors
  • Large labels need to be applied with extra care
Questions?
Simply call 01792 797 007 or Contact Code 3 Models,
... we'd love to help you through the process!

Water Slides ...
... what can be achieved and how.

Waterslide transfers are suitable for most model-making jobs and come printed on white or clear paper. Single or full colour image transfers can be produced which can then applied to the desired surface using a wet application process.

Just cut paper to required shape and immerse in water.

When carrier film starts to separate from backing paper, carefully slide your transfer onto the pre-prepared clean surface and carefully locate into position using a soft brush. Eliminate any air bubbles and allow to dry.

Instructions

Instructions are provided with each set, contact Code 3 Models between 9am-5pm Monday-Friday for additional information.

Your artwork is automatically archived for repeat orders.

Pricing 

Simply call us to discuss or use the form opposite. As each job specification is different, each job is priced individually.
Submit details of what you require and we'll be glad to call you
to discuss further. Try to including any artwork, images, dimensions, quantity etc., and we will provide you with a quote.  And remember, the better the reference, the better the decals will look.

Advice

If you're unclear about any aspects of the decals or finishing guides etc. please contact us via:
The Job enquiry Form or Call 01792 797 007
- we love answering your questions!